Jump to content

Konference

From RTIME

Za stránku odpovídá Michal Sojka

Různé seznamy konferencí (Hanz)

Seznam konferencí o řízení na University of Cambridge

Events na IFAC

Vyhledáva na IEEE

Kalendář na IFIP

Events na ACM

Konference na Yahoo

Events na PetrinetWorld

Také se vyplatí nahlédnout do referencí ve láncích které tete a poté hledat zda podobná konference není organizována v příštím roce.

Hanz opet doporuuje

The 6th International Conference on the Practice and Theory of Automated Timetabling - CR, Brno

  • Paper/abstract submissions: January 27th 2006
  • Conference: Wednesday, 30th August - Friday, 1st September 2006

The 22nd European Conference on Operational Research - CR, Prague

  • Abstract submissions: February 15th 2007
  • Conference: July 9-13, 2007


Hanz doporuuje

V těchto konferencích je Hanz v programm comiette a vřele je doporuuje.


The 14th International Workshop on Parallel and Distributed Real-Time Systems 2006

  • Paper submission deadline November 8, 2005
  • Regular paper acceptance notification December 17, 2005
  • Camera ready papers due January 10, 2006
  • Workshop April 25–26, 2006

14TH INTERNATIONAL CONFERENCE ON REAL-TIME AND NETWORK SYSTEMS

  • Deadline for paper submission: November 15th, 2005 (An acknowledgment will be sent)
  • Notification of acceptance: March 2nd, 2006
  • Camera ready paper due: April 13th, 2006

6th IEEE International Workshop on Factory Communication Systems

  • Deadline for submission: January 10, 2006
  • Notification of acceptance/rejection: March 1, 2006
  • Deadline for submission of final manuscripts: April 20, 2006

2006 CCA/CACSD/ISIC

  • Paper/Invited session/Workshop proposal January 29, 2006
  • Workshop acceptance/rejection notification March 31, 2006
  • Paper acceptance/rejection notification April 15, 2006
  • Final manuscript submission deadline May 19, 2006

Seznam konferencí

Dependable Embedded Systems Summer School

Architectural Paradigms for Dependable Embedded Systems Summer School

The objective of the Summer School is to provide expertise on strategies, processes, techniques, and tools in order to facilitate a systematic architecture-based development of dependable embedded systems. An ambitious program with high quality presentations has been set up to achieve this goal

Registration Fee

  • Until June 1, 2005: Euro 1.800
  • After June 1, 2005: Euro 1.980

FOSSTEC 2005

The International Symposium on Free/Open Source Software, Technologies and Content (FOSSTEC '05) which is being organized in the context of the 9th World Multi-Conference on Systemics, Cybernetics and Informatics, to be held in Orlando, Florida, on July 10-13, 2005

Paper Submission: March 29nd

WSEAS Prague

Vzhledem k dobrym vztahum s organizacnim vyborem mame moznost podat cast prispevku za snizene vlozne misto 400 EURO jen 200 EURO. Deadline pro podani prispevku je 15. unor. Blizsi informace najdete na web stránkách. S navrhy prispevku se obracejte na doc. Bilka nebo Ing. Burgeta.

15. unora, 2005 Paper deadline

ETFA 2005

Research papers; reporting on new developments in technological sciences. Industry and development papers; reporting on actual developments of technology, products, systems, and solutions. Tutorial and survey papers.

April 28th, 2005 Deadline for submission of long papers

June 1, 2005 Deadline for submission of work-in-progress papers and Industry practice

ICAPS 2005

The International Conference on Automated Planning & Scheduling (ICAPS) is the premier forum for researchers and practitioners in Intelligent Planning & Scheduling and related fields.

ICAPS 2005 will be take place in Monterey, California, U.S.A. between June 5 and 10 at the Hyatt Regency Monterey Resort and Conference Center.

February 21, 2005 Workshop paper submission deadline

February 25, 2005 Doctoral Consortium submission deadline

March 14, 2005 Posters deadline

KYBERNETIKA A INFORMATIKA 2005, DolníKubín

Konferencia je zameraná na prezentáciu metód a algoritmov riadenia, nových riadiacich systémov, informaných a komunikaných technológií a ich využitie v priemysle. Hlavným cielom konferencie je vytvorie spoloné fórum pre výskumníkov, pedagógov a používatelov z praxe zaoberajúcich sa problémami z oblasti automatizácie a informatiky. lánky na konferenciu möžu byt teoretického alebo aplikaného charakteru a möžu bye písané v anglickom, eskom alebo slovenskom SSKI pri SAV Fakulta elektrotechniky a informatiky STU v Bratislave Katedra automatizovaných systémov riadenia P. Knežiková Ilkoviova 3 Bratislava 1 Slovenská republika 812 19 VUJE, a. s. , Trnava s. r. o. , Koaice ProCS, s. r. o.

30. ledna 2005 zaslanie lankov

3. února 2005 potvrdenie prijatia

EMSOFT 2005

Important dates:

  • Submission deadline: April 17, 2005.

EMSOFT 2005 is interested in topics including but not limited to:

  • System design examples in all domains: automotive, consumer electronics, communications, avoinics, etc.
  • Model-based software architecture and design.
  • Software for embedded multiprocessors.
  • Networked embedded systems.
  • Ad-hoc networks of embedded computers.
  • Embedded system security.
  • Models of computation and formal methods.
  • System design and integration methodologies.
  • Programming languages and software engineering.
  • Compilers for embedded software and processors.
  • Operating systems and scheduling.
  • Middleware for embedded systems.
  • Hardware/software interfaces and system-level design.
  • Hardware-dependent software and system-on-chip support.

LinuxAutomation

Article on LinuxDevices

Jazyk konference je němina :(

Termine im überblick

  • Einsendung der Kurzfassung (Vorträge/Workshops) -> verlängert bis 28. Januar 2005
  • Einsendung des vollständigen Vortrags bis 15. März 2005
  • "Linux-Automation Konferenz 2005" 31.03.-01.04.2005

Process Control 05

January 31, 2005 Submission of abstracts

February 15, 2005 Notification of acceptance, Second announcement

April 15, 2005 Submission of full papers and conference fee payment

June 7 - 10, 2005 Conference

Topics

  1. Linear and Non-linear Control System Design
  2. Modelling, Simulation, and Identification of Processes
  3. Process Measurements and Devices
  4. Process Optimisation
  5. Robust and Adaptive Control
  6. Control Education
  7. Intelligent Control Systems
  8. Information Technologies in Automation
  9. Applications and Case Studies
  10. Dynamic and Global Optimisation of Processes (Invited Session, M. Fikar)
  11. Intelligent and Adaptive Control of Biotreatment Processes (Invited Session, A. Meszaros)

SAT-2005

Eighth International Conference on Theory and Applications of Satisfiability Testing

  • February 13, 2005 Abstract Registration Deadline
  • February 20, 2005 Paper Submission Deadline
  • February 23, 2005 SAT and QBF solver & benchmark submission
  • April 8, 2005 Author notification
  • April 22, 2005 Camera ready copy due.

INDETCON

Konference je zaměřena na tato témata:

  • Vývoj průmyslového Ethernetu
  • Reálný as v průmyslovém Ethernetu (Real-time Ethernet)
  • Přenos procesních dat, videa a IP telefonie

Konferenci připravuje Katedra telekomunikaní techniky FEL ČVUT v Praze se svými partnerskými spolenostmi. Mediálním partnerem je odborný asopis Automatizace.

CAV 2005

Computer Aided Verification

  • Uz je uzavřená, ale třeba napřesrok:)

Technical Computing Prague 2005

Dříve MATLAB konference

Mezinárodní konference Technical Computing Prague 2005 se bude konat 15.11.2005 od 9 do cca 18 hodin v Praze v Kongresovém centru ČVUT (Masarykova kolej, Thákurova 1, Praha 6).

Uzávěrka abstraktů 18.9.2005

MTNS 2006

17th International Symposium on Mathematical Theory of Networks and Systems Kyoto International Conference Hall, Kyoto, Japan, July 24-28, 2006

  • Submission of Extended Abstract : November 30, 2005 (Call for Papers)
  • Notification of Acceptance: March 2006
  • Submission of Final Manuscript: April, 2006
  • Conference Dates: July 24-28, 2006

2006 IEEE International Symposium on Industrial

Electronics ISIE’06, 9-13 July 2006, ETS-Downtown Montréal, Canada

  • Reception of papers : December 20th, 2005
  • Paper acceptance notification : February 25th, 2006
  • Camera-ready papers and registration : April 29th, 2006